Hosted by IDTechEx
Wearable Technology Insights
Technologies, markets and analysis of the wearable technology industry
HomeEventsReportsAdvertiseTVCareersAbout UsSign-up or LoginIDTechExTwitterFacebookLinkedInGoogle+YoutubeRSSForward To Friend
Wearable Technology Insights
Posted on April 02, 2018

Scientists print all-liquid 3-D structures

Advanced Wound Care Technologies 2018 - 2028
Scientists from the Department of Energy's Lawrence Berkeley National Laboratory (Berkeley Lab) have developed a way to print 3-D structures composed entirely of liquids. Using a modified 3-D printer, they injected threads of water into silicone oil — sculpting tubes made of one liquid within another liquid. For more see the IDTechEx report on 3D printing.
 
They envision their all-liquid material could be used to construct liquid electronics that power flexible, stretchable devices. The scientists also foresee chemically tuning the tubes and flowing molecules through them, leading to new ways to separate molecules or precisely deliver nanoscale building blocks to under-construction compounds. For more information see the IDTechEx report on stretchable and conformal electronics.
 
The researchers have printed threads of water between 10 microns and 1 millimeter in diameter, and in a variety of spiraling and branching shapes up to several meters in length. What's more, the material can conform to its surroundings and repeatedly change shape.
 
"It's a new class of material that can reconfigure itself, and it has the potential to be customized into liquid reaction vessels for many uses, from chemical synthesis to ion transport to catalysis," said Tom Russell, a visiting faculty scientist in Berkeley Lab's Materials Sciences Division. He developed the material with Joe Forth, a postdoctoral researcher in the Materials Sciences Division, as well as other scientists from Berkeley Lab and several other institutions. They report their research March 24 in the journal Advanced Materials.
 
poster ad small
The material owes its origins to two advances: learning how to create liquid tubes inside another liquid, and then automating the process.
 
For the first step, the scientists developed a way to sheathe tubes of water in a special nanoparticle-derived surfactant that locks the water in place. The surfactant, essentially soap, prevents the tubes from breaking up into droplets. Their surfactant is so good at its job, the scientists call it a nanoparticle supersoap.
 
The supersoap was achieved by dispersing gold nanoparticles into water and polymer ligands into oil. The gold nanoparticles and polymer ligands want to attach to each other, but they also want to remain in their respective water and oil mediums. The ligands were developed with help from Brett Helms at the Molecular Foundry, a DOE Office of Science User Facility located at Berkeley Lab.
 
In practice, soon after the water is injected into the oil, dozens of ligands in the oil attach to individual nanoparticles in the water, forming a nanoparticle supersoap. These supersoaps jam together and vitrify, like glass, which stabilizes the interface between oil and water and locks the liquid structures in position.
 
"This stability means we can stretch water into a tube, and it remains a tube. Or we can shape water into an ellipsoid, and it remains an ellipsoid," said Russell. "We've used these nanoparticle supersoaps to print tubes of water that last for several months."
 
Digital Health 2018
Next came automation. Forth modified an off-the-shelf 3-D printer by removing the components designed to print plastic and replacing them with a syringe pump and needle that extrudes liquid. He then programmed the printer to insert the needle into the oil substrate and inject water in a predetermined pattern.
 
"We can squeeze liquid from a needle, and place threads of water anywhere we want in three dimensions," said Forth. "We can also ping the material with an external force, which momentarily breaks the supersoap's stability and changes the shape of the water threads. The structures are endlessly reconfigurable."
 
The research was funded by the Department of Energy's Office of Science.
 
Source and top image: Berkeley Lab
Learn more at the next leading events on the topic:
or Printed Electronics USA 2018 External Link on 14 - 15 Nov 2018 at Santa Clara Convention Center, CA, USA
hosted by IDTechEx.